So, you’ve got a brand-new flavour you’re dying to try, but your pod is still half-full of the old stuff. Or even worse, the dreaded burnt taste has struck, and you need to rescue the good juice before it’s too late!
Getting e-liquid out of a pod might seem a bit fiddly, but don’t worry. It’s actually super simple. This guide will show you exactly what to do, so you can get back to vaping the good stuff.
TLDR: How to Change Vape Juice Quickly
- The easiest way is to use a blunt-tip syringe through the fill hole to suck the liquid right out. It’s like a little rescue mission for your e-liquid!
- No syringe? No problem. Just twist the corner of a paper towel into a point, stick it in, and let it soak up the juice. Repeat until it’s empty.
- Emptying your pod is the key to a proper clean, banishing flavour ghosts, and saving perfectly good juice from a dodgy coil.
What Is the Quickest Way to Empty a Vape Pod?
The absolute fastest and cleanest way to get e-liquid out of your pod is with a blunt-tip syringe. You just poke it through the fill port and draw the liquid out – the whole thing takes less than a minute.
Don’t have a syringe handy? No stress. The trusty paper towel trick works a treat. Just twist a corner into a tight point and use it to soak up the juice.
Either way, emptying your pod is the crucial first step before you can get on with the important business of cleaning, switching flavours, or rescuing your juice.
vanilla tobacco
Need more help? Follow the steps below
Step-by-Step: How to Remove E-Liquid From a Pod
Step 1 – Prep Your Pod
First, pop the pod out of your vape device. Find that little rubber or silicone plug that covers the fill hole and gently pull it out.
Step 2 – Get The Juice Out (Method 1: The Syringe)
If you have a blunt-tip syringe, this is the clean and easy way. Poke the tip into the pod and slowly pull the plunger back.
Step 3 – Get The Juice Out (Method 2: The Paper Towel)
No syringe handy? Grab a paper towel. Twist one corner into a tight, thin point and poke it into the fill port. Let it soak up the juice, then repeat with a fresh corner until the pod is empty. It takes a bit more patience, but it gets the job done!
Step 4 – The Final Wipe Down
For a truly clean finish, use a cotton swab (like a Q-tip) to gently wipe away any last little droplets from inside the pod. Sparkling!
Top Reasons to Empty Your Vape Pod
So, why bother emptying your pod? Here are four compelling reasons that you should
For Pure Flavour: Getting rid of the old juice means you won’t have the ghost of your last flavour haunting (“flavour ghosting”) your new one. You get to taste your new e-liquid exactly as it was meant to be.
For a Proper Clean: You can’t rinse a pod properly if it’s full of sticky e-liquid. Emptying it first is essential for giving it a good wash.
To Salvage Your Juice: Has your coil given up the ghost? Don’t let it take your e-liquid down with it! Emptying the pod lets you save the juice and transfer it to a fresh pod.
What to Do with the Removed E-Liquid?
- If You’re Reusing It: Use your syringe to transfer the salvaged e-liquid into a clean, empty bottle. Store it in a cool, dark place until you need it. Something to keep in mind: vape juice expires.
- If You’re Binning It: Never, ever pour e-liquid down the sink or drain. The best way to dispose of it is to let it soak completely into a paper towel, then throw the towel in your regular rubbish bin.
- Give it a Quick Inspection: Before you reuse any salvaged juice, check it for little dark flecks. If you see any, it means the coil was burnt, and sadly, that juice is best thrown away.
Frequently Asked Questions
Can I reuse the pod after I empty it?
Absolutely! For the best results, give the empty pod (which shouldn’t have a pre-installed, non-removable coil) a quick rinse with warm water and let it air dry completely before refilling it. This will give you the cleanest possible taste from your next flavour.
Is it okay to just top it off with a new flavour?
You can, but we wouldn’t recommend it! The flavours will mix, and you might end up with a weird-tasting concoction (Blueberry and Tobacco? No, thanks!). To really enjoy your new juice, it’s always best to empty and clean the pod first.
What tools work best to empty a vape pod?
A 14-gauge blunt-tip syringe is the most precise tool for emptying pods. It gives you control over the process and helps you save the e-liquid if needed. Paper towels and cotton swabs work well as alternatives if you don’t have a syringe – just be patient as they take a bit longer.